Description

Please provide us with some or all of thew below to see if we have what your requiring:

• Length: Measure the length based on the supplier's preferred method (e.g., center of U-joint to center of U-joint, or from the transmission seal to the differential mounting surface). Ensure the vehicle is at ride height when measuring.
• Diameter and Material: Specify the outside diameter and wall thickness of the tube, and the desired material (e.g., steel, aluminum, chromoly).
• U-Joint Series/Size: Provide the universal joint series number (e.g., 1310, 1350, 1410) or the measurements (width between tabs and bearing cap diameter) to ensure compatibility with existing yokes.
• Yoke/Flange Type:
  • Transmission End: Identify the slip yoke type, spline count on the output shaft, and seal diameter.
  • Differential End: Identify if it uses a slip yoke or a flat flange, including the bolt pattern and pilot diameter for flanges.
• Design Type: Indicate if the vehicle uses a one-piece or two-piece tailshaft and if a center bearing (carrier bearing) is required. 

Specifications

• Weight: 200gr
• Usage: Indoor & outdoor

Pros and cons

• Sustainably produced
• Ideal for everyday use
• May discolor in direct sunlight